Rothenberger Industrial TF 3006 Series, Operating Manual

Page: 33 / 56

33
ACCESSORIES
Accessories
There are four different head attachments included
with the inspection camera.
Note: The head attachments can be fitted to the
camera head. Unnecessary force or movement
during use may result in the loss of attachments.
Flexible shaft
Easily change or replace the flexible shaft (9) using the clip function.
Unscrew the sleeve nut to take off the flexible shaft. Removing the
flexible shaft.
Proceed in reverse order to fit the flexible shaft. Attaching the flexible
shaft
Flexible shaft extension Flexible shaft
The maximum reach of the inspection camera can be extended using a three metre flexible
shaft extension. Connect up to three extension shafts to gain a maximum reach of 10.80
metres.
Extensions can affect the handling of the inspection camera depending on pipe geometry
and inspected media.
Hanging hook
The inspection camera is equipped with a hanging hook (13) to
facilitate storage.
GB
1500000059,60,61_Anleitung_D,GB,F 13.08.2012 15:12 Uhr Seite 33