Rothenberger Industrial TF 3006 Series, Operating Manual

Page: 21 / 56

21
Safety instructions
WARNING! Read the safety instructions carefully. This operating manual contains important and
useful information regarding the correct operation of this product.
Failure to comply with the safety notes and instructions can cause electric shock, fire and/or serious
injury.
The manufacturer can accept no responsibility for damage to persons or property and / or conse-
quential damages caused by incorrect usage of this product or by failure to follow the operating ma-
nual and safety instructions. Incorrect use of this kind will invalidate the warranty.
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities; or lack of experience and knowledge; unless they are supervised
and have been given instructions concerning use of the appliance by a person responsible for
their safety. Keep children and other people out of the area when operating this product.
2. Treat this tool with care. Ensure the moving parts function correctly and do not stick. Check
whether parts are broken or so badly damaged that that the device’s functions are impaired. Ha-
ve damaged parts repaired before you operate the device.
3. It is not possible to operate the device safely if the device shows visible signs of damage, does
not function properly, was stored for a longer period of time under unfavourable conditions or
has been damaged in transit. In any of these cases stop using the product and secure it so that
it cannot be unintentionally started.
4. Put the device in to its plastic case after use or cleaning and store it in the plastic case, out of the
reach of children when it is not in use.
5. Operation of the device in areas where there is a risk of explosion or operation on persons or ani-
mals is not permitted and could lead to injury or danger.
6. Use the device and any accessories or tools etc. according to these instructions. Bear in mind
the type of work you wish to do. The use of this device for applications other than those inten-
ded can lead to dangerous situations.
7. Avoid excessive use, vibrations, exposure to direct sun light ore storage in humid areas. Do not
bend the flexible shaft further than the specified minimal bending radius.
8. Only the camera with LED light and the flexible shaft may be immersed on liquid. Do not immer-
se the camera or shaft in liquid carrying voltages. Do not immerse the camera and flexible shaft
in more than 180 cm of liquid. Observe the marking on the flexible shaft for this purpose. The
handle and the monitor must be kept dry and may not be exposed to liquids.
9. Turn the device off and allow it to reach room temperature before exposing it to variations in
temperature. Otherwise condensation can form, which under certain circumstances can dama-
ge the device.
10. Do not stare into the LED light as it can dazzle you or damage your eyes.
11. Modifications to the device are not permitted.
Item may only be used for technical inspections.
Not for use on persons or animals.
GB
1500000059,60,61_Anleitung_D,GB,F 13.08.2012 15:12 Uhr Seite 21