24
GB
24
Switching the signal tone on/off
The signal tone is automatically switched
on upon first use.
To switch the signal tone off press the
metal / live wire button (4) and the wood
detection button (3) simultaneously. The
signal tone is now switched off.
- To turn the signal tone on, repeat the
steps above.
Preparing for use / calibrating the device
The green LED status light comes on in
every mode to signal that the device is
ready for use. If the green LED does not
light calibrate the device. Proceed as
follows:
- Metal detection mode / live wire detection mode: Keep the device clear of any objects
which may cause interference.
- Wood detection mode: Place the device on the surface of the material to be scanned.
- Press and hold the required detection mode button (metal / wood) until the green LED
status light comes on.
The device is ready for use.
3
4
1500001135_Anleitung_DE,GB,FR.indb 24
03.07.15 09:48
