102
GB
2
Power supply
Shut down the automatic
circuit breaker. Make sure
that is shut off in all poles.
3
Electrical connec-
tion
An external switch e.g. light
switch, thermostat, etc.
must be used to control the
device, it must be located
between the L and the T
wire.
4
Cable port
Remove the cap from the ca-
ble port.
5
Cable routing
1.
Slide in the cable through
the cable port.
2.
Place the cable through
the cable route.
7
Humidity adjusting
The device will operate auto-
matically, if it detects excess
humidity in the air. Use the
trimmer to set the desired
humidity level:
A-: Min. approx. 40 %
B+: Max approx. 90 %
1
Installation
1.
Remove the cover.
2.
Mark the holes of the in-
stallation brackets on the
wall.
3.
Drill the holes and fit the
plugs.
4.
Fix the back valve to the
device.
6
Wiring
Install the device with the
screws and connect the ca-
ble to the terminal as shown.
Summary of Contents for Air Comfort 100
