Rotenso M35X, User Manual

Page: 114 / 148

78
User manual
Room air conditioner - MIRAI X
EN
PART 5. REMOTE CONTROL SUPPORT
1. BUTTONS AND FUNCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your air
conditioner, refer to the How to Use Basic Functions section of this manual.
1. ON/OFF
Button to turn on and turn off the air conditioner.
2. TEMP
Increases temperate in 0.5°C (1°F) increments. Max. temperature
is 30°C (86°F).
Note
: Press together & buttons at the same time for 3 seconds
will alternate the temperature display between the °C & °F.
3. SET
Scrolls through operation functions as follows:
Wind flow follow people ( )
Breeze Away ( ) Active Clean/
Self clean ( ) Fresh ( ) Sleep ( ) Follow Me ( )
AP mode ( ) Wind flow follow people ( )
Breeze Away ( ) ...
The selected symbol will flash on the display area, press OK
button to confirm.
4. TEMP
Decreases temperature in 0.5°C (1°F) increments. Min.
temperature is 16°C (60°F).
5. FAN SPEED
Selects fan speeds in the following order: AU
20% 40%
60%
80% 100%.
Press together & buttons to increase/decrease the fan speed
in 1% increments.
6. SWING
Starts and stops the horizontal louver movement. Hold down for
2 seconds to initiate vertical louver auto swing feature.
7. MODE
Scrolls through operation modes as follows: AUTO
COOL
DRY
HEAT FAN
Note : HEAT mode is not supported by the cooling only appliance.
8. ECO SMART EYE
Used to detect the people activities in the room to save energy.
9. OK
Used to confirm the selected functions.
10. TIMER
Set timer to turn unit on or off
8
7
1
2
3
10
9
4
5
6
11
12
DEFO
13
14