29
User manual
ANZU remote control
EN
REMOTE CONTROL SUPPORT
7.9. Clean Function
Clean
Press CLEAN button
7.10. Turbo Function
When you select Turbo feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select Turbo feature in HEAT mode, for units with Electric heat
elements, the Electric HEATER will activate and jump-start the heating
process.
Turbo
Press TURBO button
NOTE:
Press and hold Turbo button for seven seconds to start/stop memory feature of Follow Me function.
• If the memory feature is activated “ON” displays for 3 seconds on the screen.
• If the memory feature is stopped “OFF” displays for 3 seconds on the screen.
• While the memory feature is activated, press the ON/OFF button, shift the mode or power failure will not
cancel the Follow me function.
AP function ( ):
Choose AP mode to do wireless network configuration. For some units, it doesn’t work by pressing the SET
button. To enter the AP mode, continuously press the LED button seven times in 10 seconds.
7.11. Fresh Function
Fresh function ( ) (some units)
When the FRESH function is initiated, the ion generator is energized and will
help to purify the air in the room.
Fresh
Press FRESH button
Airborne bacteria can grow in the moisture that condenses around heat
exchanger in the unit. With regular use, most of this moisture is evaporated
from the unit.
By pressing the CLEAN button, your unit will clean itself automatically. After
cleaning, the unit will turn off automatically. Pressing the CLEAN button
mid-cycle will cancel the operation and turn off the unit. You can use CLEAN
as often as you like.
NOTE:
You can only activate this function in COOL or DRY mode.
Summary of Contents for ANZU
Page 30: ...NOTES...
Page 31: ...NOTES...
Page 32: ...email info rotenso com www rotenso com PIECZ INSTALATORA...
