14
S14 Integrated Network Streamer
Power Off/Standby - To power off the unit to standby
push and release
the
front panel Power
1
button or
PUSH-HOLD
the remote control Power
A
button for 2 seconds until the unit powers off (up to 3 seconds).
Button
C
:
Push the button once to mute the audio. An indication
appears in the front panel display. Press the button again to restore the
previous volume level.
VOLUME Knob
6
and VOL +/- Buttons
D
: The /— buttons
on the remote and the rotary control on the front panel provide the master
VOLUME control, adjusting the output level.
Source Button
4
E
: Press the corresponding input button on the front panel
4
or remote control
E
to select the desired listening source.
Push the front panel source buttons to select STREAMING, BLUETOOTH,
PC-USB, COAX/OPT, AUX and USB or use the dedicated source button
on the remote control. The COAX/OPT is a toggle source input and will
switch between the Coaxial and Optical inputs when pressed repeatedly.
Preset Buttons
F
: The Preset buttons are used to memorize and recall a
station. To save a station PUSH-HOLD the preset button for 3 seconds. To
recall a station simply push and release the desired button.
NOTE:
Preset functions are not available for all streaming services.
Button
G
: The SETUP button activates the setup menu on the front
display. Push the SETUP button again to move to the next setup menu option.
Button
H
: Pressing briefly returns to the previous selection screen or
exits the setup menu if you are in the top menu level.
Playback Control Buttons
I
: Press the Play
/Pause
button to start
playing or stop.
and
buttons are used to select tracks of the selected
audio source.
Main Menu
You can enter the Setup menu from the front panel by pressing the
H
button on the remote control or the MENU
7
button on the front panel.
To select the desired menu, use the MENU
7
button on the front panel or
the
/
B
arrow buttons on the remote control to toggle between the
menus and press + button
7
on the front panel or the “OK“ button on the
remote control to confirm. You can change the values of the selected setting
by pressing the — or + button on the front panel or the
/
B
arrow
buttons on the remote control then press the “OK” button on the remote
control or the MENU button
7
on the front panel to save and to return to
the previous menu.
Setup
Bass
Treble
Balance
MENU for Next, + to change
Bass:
Bass level can be changed to desired settings.
Options include: -10 - +10.
Treble:
Treble level can be changed to desired settings.
Options include: -10 - +10.
Balance:
Adjusts the left-to-right balance of the sound output. The factory
default is the center position or “0”.
Options include: L15 - R15.
Dimmer:
Sets the brightness of the front display. The Menu Setup will always
activate at the brightest level regardless of the Dimmer setting to ensure the
unit configuration options can easily be accessed and modified.
Options include: High (Default), Medium, Low.
LED Dimmer:
Sets the brightness of the ON level of the front panel Power LED.
Options include: High (Default), Medium, Low.
Power On Max Volume:
This sets the maximum volume level when the unit
is turned on. “45” is the factory default.
Options include: 0-96.
Auto Power Off:
Set the amount of time the units stays powered on when
there is no audio signal. The unit will automatically go to standby mode
if audio is not detected for the specified timer period. Default: 20 MINS.
Options include: 20 Minutes (Default), Disable, 1 Hour, 2 Hours, 5 Hours,
12 Hours.
Network Info:
Shows the network connection status and network settings,
Wi-Fi MAC, Bluetooth MAC and Ethernet MAC.
Software Info:
Shows the current software version loaded into the unit.
Wi-Fi Reset:
This option erases all current Wi-Fi settings in the unit.
Factory Reset:
This option sets the unit back to the original setting as when
it left the factory including resetting the Wi-Fi settings. All user settings will
be erased.
NOTE:
Use caution when resetting the unit to factory defaults as all user
configured options will be erased and reset to original factory settings.
EXIT:
Exits this setting menu.
