Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instruction for use
ERROR MESSAGES
o
-In the event of a power outage or if the Stop button was pressed during the ice
making process, small ice flakes may form which may obstruct the automatic ice
scoop device. If this occurs, switch off the appliance and remove the ice by pushing
the scoop.
Problem
Possible cause
Possible solution
Water level indicator (8)
is flashing
No water
Press Stop (3), refill water, wait 3 minutes,
press Start (1).
No lights are on
No power
Connect to the mains
Ice cubes are too big
and stick together
Water temperature or
room temperature is
too low
Choose smaller ice cube size (5/6/7)
Ice indicator (4) and
water indicator (8) are
both on
Water tank is blocked by
ice cubes
Unplug the appliance and remove the ice
cubes under the scoop. Plug the ice maker
back in and press the Start button (1). The
appliance will restart automatically in 2
minutes.
DISPOSAL
o
For proper disposal, the unit is to return to the dealer, the service agent or the
company Rotel AG.