Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
106
•
INSTALLATION
Selection of installation equipment
o
Cut out the work surface according to the sizes shown in the drawing.
o
For the purpose of installation and use, a minimum of 5 cm shall be maintained
around the hole.
o
Be sure the thickness of the work surface is at least 30
mm. Please select heat
-
resistant and insulated work surface material (
w
ood and similar fibrous or hygro-
scopic material shall not be used as
a
work surface material unless impregnated) to
avoid electric shock and deformation caused by the heat radiation from the
hot-
plate
a
s shown below:
Note:
o
The safety distance between the sides of the hob and the inner surfaces of the
worktop should be at least 3
mm.
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm) F (mm)
590
520
55
51
560
+4
+1
490
+4
+1
50 min.
3 min.
o
Always
make sure that the ceramic cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the ceramic cooker hob is in
a
good work
ing
condition
a
s shown below.
