background image

1. Safety Information

This machine is made for household usage. The engine is designed to run for maximum 

20 minutes continuously and then 10 minutes off before restarting again.
This machine has dangerous parts (rotating and electrical potential parts). In case of us-

age in non-compliance with this manual it can lead to serious personal injury or machine 

damage.

1.1. Installation site

Install the device in a place where children are not endangered. Children cannot recog-

nize dangers are based in the improper handling of electrical devices. Therefore, it is not 

allowed to use electrical equipment by children!

•  Never operate the machine out-doors, in snow, rain or moister rooms. Do not spill any 

liquids on electrical parts.

•  Always be sure the machine is on a firm level surface and will not tip, roll, slide, or fall 

while operating. 

•  Unplug from outlet when not in use, before cleaning or moving it.

1.2. Electrical hazard

Never service electrical parts or cables during operation. Contact with electrical parts 

could result in severe injury or death.

•  Only connect to a power outlet with proper voltage (230 V), which indicated on the rating 

label.

•  Never  use  this  machine  with  worn  electrical  cords  or  internal  cables.  Severe  electrical 

shock and equipment damage may result.

•  It is only allowed to connect the power outlet to an earthed electrical system. The electri

-

cal supply must be secured with an earth leakage circuit breaker and proper grounded.

•  Never start the engine with any opened cover. Never service the generator during opera

-

tion!

1.3. Hazards based on movable parts

•  Never service movable parts during operation.

•  Never start the engine with any opened cover.

•  Always keep hands, feet and loose clothing away from the moving parts.

1.4. Appropriate use

•  Always check the machine before using it. It is not allowed to use Machines with known 

defect parts.

•  Always turn of the machine if you are leaving the installation site.

•  Do not use appliance for other than intended use.

1.5. Maintenance

•  Do not try to repair the machine yourself. Return the appliance to the nearest authorized 

service facility for examination, repair, mechanical or electric adjustment.

8

EN

Summary of Contents for SPA-3BSW

















Reviews: