DAX0110
20
Changing the sawing angle
1. Loosen the hexagon head screw from the base of
the jigsaw and move it to the desired angle. The
scale can be seen on the bottom of the base. It can
be regulated between 0
0
and 45
0
to the right or left.
When returning the angle to 0
0
, ensure that the
screw is on the middle slot.
2. Tighten the hexagon head screw after the
regulation.
Screw
6. MACHINE MAINTENANCE AND SERVICE
Control and clean the machine regularly in order to keep it in good condition. The air
vents of the machine should always be kept clean. Unplug the machine from the power
outlet and clean it thoroughly after use. Use pressure air when cleaning. The coals must
be changed when approx. 1/3 is left from the old ones.
7. SPECIFICATIONS
Jigsaw DAX0110
Voltage
230V ~ 50Hz
Input
710W
Idling speed
500-3000 rpm
Cutting depth (max)
Wood
80mm
Metal
10 mm
Hand-arm vibration 5.4 m/s
2
8. ENVIRONMENTAL PROTECTION
Follow the local disposal and recycling instructions when disposing of the package
materials.
Do not dispose of the machine as household waste but recycle it with the
separate electronic and electrical equipment waste. For more information (In
Finland) please visit www.serty.fi
