BRP-Rotax
INSTALLATION INSTRUCTION
Figure 3.4
1
Large fuel hose
2
Fuel filter
Concerns all engines except 125 MAX evo
For engines without exhaust slide, a direct connec-
tion (with vacuum hose’) between the gearbox and
the fuel pump must be installed.
NOTE
For engines
with
exhaust slide, see chap. 8.
Step
Procedure
5
Cut a 400 mm (15.75 in.) long piece of
fuel hose.
6
Secure the vacuum line (pos. 2) on the
gearbox housing to prevent disen-
gagement using a tie wrap (pos. 1).
Figure 3.5
Concerns all engines
Step
Procedure
7
Install the connection between the fuel
tank and the fuel filter. the length of
this line may vary from chassis to
chassis.
ATTENTION
Pay attention to the direction of the arrow on
the fuel filter.
This must point towards the fuel pump.
m
WARNING
Non-compliance can result in serious injuries
or death!
Route the fuel line from the fuel tank to the fuel fil-
ter so that it does not touch any moving parts of
the track and attach the fuel line onto the top side
of the chassis tube.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Page 3
Edition: March 01 2021
Summary of Contents for 125 JUNIOR MAX evo
Page 54: ......
