Element 9 Manual
Original instructions
Nov 2019
12
Usage for bevel
Release the lock lever "A", and the wing nut "B". Then to change the bevel plate angle from 0
∘
to 45
∘
Fix the lock lever "A"
and wing nut "B" as fig.7.
WARNING :
please be sure to disconnect the power plug.
LASER
The method for laser usage.
1.Push the left bottom "A" to start the laser (B), push again to turn off as fig 8.
2.The laser will change according to the angle plate for guiding the cutting. Example: the bevel indicator at (A) 0
∘
the laser is at the
notch (B), if the bevel indicator at 45
∘
then laser is at the notch ( c) as fig 9. others angle is without reference
ALIGNING THE LASER GUIDE LINE
DANGER:
Laser radiation. Avoid direct eye contact with light source
WARNING:
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposures. When you adjust the laser please don’t tu
rn on switch. Fig.10 Otherwise starting the blade can be
dangerous.
