Element 9 Manual
Original instructions
Nov 2019
10
6) OPERATING INSTRUCTIONS
ASSEMBLY AND ADJUSTMENT INSTRUCTIONS
WARNING:
For your own safety, never connect the plug to a power source outlet until all assembly steps are complete and you have read
and understood the safety and operating instructions. The safety cover is attached to the saw for your protection. Should the
safety cover become damaged, do not use the saw until damaged cover has been replaced, by a new cover. If the safety cover
becomes dirty, or chip adheres to it. Clean the safety cover carefully with a damp cloth.
Installing a New Saw Blade
WARNING:
To prevent accidental or personal injury, always turn off the trigger switch and disconnect the power plug from the
receptacle before removing or installing a blade.
Only use blades specially designed for metal cutting saws. Do not to use any abrasive wheels. Fitting of alternative purpose or
different sizes blades will void the machine warranty and possibly result in personal injury. Check regularly that the blade is flat,
ensuring the saw is disconnected from the power source.
Push the lower guard lever (A)
To open the plate become maximum.
Use the a spanner to hold the flange, draw out 6mm HEX wrench to loosen the arbor screw by counterclockwise
