background image

Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-732-4744 - rostra.com

 Page 

7

Installation Notes 
_____________________________________________________________________________ 
 
_____________________________________________________________________________ 
 
_____________________________________________________________________________ 

 
 

A Note on Activating and Exiting the GPS Interface During an Incoming Phone Call 

While the vehicle’s steering wheel control allows for the activation of the GPS unit while driving, it is advisable 
for the installer to also place the surface-mount membrane switch included with this navigation system in a 
location that is accessible to the driver while the vehicle is in motion.  While the steering wheel’s phone hang 
up button will also let the driver exit the navigation interface, using this button ignores an incoming phone call 
if being used to transfer from the navigation system back to the factory interface.  In such an instance, the driver 
is advised to use the membrane switch pictured below to do so seamlessly in order to answer a phone call.  
Likewise, this control switch can be used to enter and exit the navigation interface at any given time. 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 250-7610









Reviews: