Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-732-4744 - rostra.com
Page
4
T-harness Installation (Chevrolet Camaro and Malibu)
Chevrolet Camaro T-harness Installation
Chevrolet Malibu T-harness Installation
NOTE:
The GVIF harness for both of the vehicles listed above is to be connected to the back of the vehicle’s
LCD screen and
NOT
directly to the radio.
Default Programming Switch (Dip Switch) Settings
Default Programming Switch Settings
1 – On
2 – Off
3 – On
4 – Off
5 – On
6 – On
7 – Off
8 – On
Factory or Aftermarket Camera Settings
To use an aftermarket camera – Place switch #1 in
OFF
position.
To use the vehicle’s factory camera – Place switch #1 in
ON
position.
Note:
Installer is advised to disconnect the negative battery terminal after any changes are made to the programming switches on the
navigation module.
Visit
www.rostra.com
to view all compatible backup cameras!
