LMA8 Mic/Line Preamplifier
7
Direct input
The analog input D-SUB connector is for the balanced
direct line inputs to any installed digital module.
With no digital module installed, the connector is inactive
The inputs are electronically balanced. For unbalanced
operation, the negative input should be shorted to
ground.
The input impedance is 10 kohm
Maximum input is +30 dBu in balanced mode.
Maximum input is +24 dBu in unbalanced mode.
The 25 pin D-SUB connector follows the TASCAM
standard.
Digital interface slot
This is the slot for the optional digital interface module,
shown here with the USB module installed
The interface module is installed by opening op the box
and fastening the module with screws and connecting it
with ribbon cables.
The procedure is simple and straight forward for a
qualified technician. It is described in the technical
manuals for the USB and AES modules.
