How to use
·
Clean your skin thoroughly to ensure that it is hair-free, completely dry and free of oily
residue. (Residue of essence milk)
·
Ensure that the outlet is free from dirt, hair and other dirt, damage or abnormality. If there
is dirt, please be sure to clean, so as not to cause product malfunction, deterioration
and skin problems.
·
Skin test should be carried out before using the device, and the skin condition should
be confirmed 2 hours later. If there is no abnormality in the irradiated area, the product
can be used with confidence
01
Wet the head of the shaver with water, and use the
shaver to shave the hair off.
02
Connect the power supply, the front indicator will light
up after the power supply is connected.
03
Wear goggles when using to avoid eye damage
04
Long press the power button for 1.5S to power on, after
power on, click to switch gears.It is recommended to select
the gear according to the skin color card, and it is
recommended to start with the first gear for the first use.
Under the condition of not damaging the skin, the higher the
gear, the better the hair removal effect.
05
Put the product vertically on the part that needs hair
removal, when the flash outlet completely close the
skin,click the flash button, and then move it to the next
area to for depilation.
