EN - 6
This monitor will re-inflate automatically to approximately 220 mmHg if the system detects that
your body needs more pressure to measure your blood pressure.
Note:
1. This monitor automatically switches off approximately 1 minute after last key operation.
2. To interrupt the measurement, simply press the ON/OFF/START or M key; the cuff will deflate
immediately.
3. During the measurement, do not talk or move your arm or hand muscles.
Recalling Values from Memory
1. The monitor has two memory zones (1 and 2). Each zone can store up to 50 measurements.
2. To read memory values from a selected memory zone, use the User-Switching Key to select a
memory zone (1 or 2) from which you want to recall values. Press the M key. The first reading
displayed is the average of the last 3 measurements stored in memory.
3. Continue to press the M key to view the last previously stored measurement. Every measure-
ment comes with an assigned memory sequence number.
Note:
The memory bank can store up to 50 readings per memory zone. When the number of
readings exceeds 50, the oldest data will be replaced with the new record. As you press M
key, date and time will be displayed on alternating manner in every 4 second interval, along
with the display of the average or the next previously stored measurement.
Clearing Values from Memory
1. Press the User-Switching key to select the memory zone 1 or memory zone 2.
2. Continue to press the M key for approximately 5 seconds, then the data in the pre-designated
memory zone can be erased automatically.
Note :
The data in both memory zones (zone 1 and zone 2) can be erased if any of the batteries is
moved away (Suggest the users to first record the data on the Blood Pressure Log before
replace or move away the batteries.)
Time Adjustment
1. To adjust the date/ time in the monitor, press the Time-set key. The display will show a blinking
number showing the month.
2. Change the month by pressing the “+” key. Each press will increase the number by one in a
cycling manner. Press the Time-set key again to confirm the entry and the screen will show a
blinking number representing the date.
3. Change the date, the hour and the minute as described in Step 2 above, using the“+” key to
change and the Time-set key to confirm the entries.
4. A "0" will reappear as the Blood Pressure Monitor is ready for measurement again.
Data Transfer to PC Ready (Optional)
Accessories for data transfer to PC including: