Reader Operation
AYC-Qx4 Family Installation and Programming Manual
29
3.
Enter the new 4-digit code you wish to set as
the Programming code.
You hear three beeps.
The system returns to Standby mode.
4.2.6
Changing the Facility Code
•
The Facility code can be in the range of 000 to 255.
•
The default Facility code is 0.
To change the Facility code:
1.
Enter Programming mode.
2.
Press
4
to enter Menu 4.
The left LED turns red.
3.
Enter the new 3-digit code you wish to set as
the Facility code.
You hear three beeps.
The system returns to Standby mode.
4.2.7
Setting the Backlight Behavior
To set the backlight behavior:
1.
Enter Programming mode.
2.
Press
6
to enter Menu 6.
The left LED turns red.
Red Green
Green
Red
Red Green
Green
Red
