Changing the Programming Code
1)
2)
"3"
Menu 3
3)
4)
Note:
Enter Programming Mode
Press
to enter
The Transmit LED will
flash red.
Enter the new 4-digit code
you wish to set as the
Programming Code
System returns to
Transmit Mode
You will hear one beep
The Program LED will turn off
The Transmit LED will turn red
- Programming Code can not be erased, i.e. the code
0000 is not valid and will not erase the Programming
Code.
!
!
!
!
Changing the Facility Code
Return to Factory Default Settings
1)
2)
"4"
Menu 4
3)
4)
Note:
1)
Enter Programming Mode
Press
to enter
The Transmit LED will
flash orange.
Enter the new 3-digit code
you wish to set as
Facility Code
System returns to
Transmit Mode
You will hear one beep
The Program LED will turn off
The Transmit LED will turn red
- Facility codes can be in the range of 000 to 254.
Enter Programming Mode
!
!
!
!
Warning:
You must be very careful before using this command!
Doing so will erase the entire memory which includes
all User and Special Codes, and return all codes to
their factory defaut settings.
Page 19
06/01
AY-Q54
Page 18
06/01
AY-Q54
Transmit
Program
GREEN
3
Transmit
Program
RED
? ? ? ?
Transmit
Program
GREEN
4
Transmit
Program
RED
? ? ?
Transmit
Program
GREEN
RED
Transmit
Program
GREEN
ORANGE
Transmit
Program
GREEN
