Rosslare AC-Q74 Installation And Programming Manual Download Page 37 | Manualshive

Page: 37 / 46

background image

Power Supply Installation Instructions

AC-Q74 Installation and Programming Manual

37

12.

Power Supply Installation

Instructions

The power supply installation instructions are relevant for the

following models:



PS-25T



PS-A25T



PS-C25T



PS-C25TU

12.1

Introduction and Key Features

The PC-25T Power Supply is designed for use with all Rosslare secured

series stand-alone access control units. The PC-25T contains two

power supplies. One power supply is for the lock strike, the other is
for the access control unit (ACU).
The lock strike is attached directly to the power supply. This design
isolates the lock from the ACU securing the functionality of lock even

if the ACU is tampered with. When a valid code is entered at the

ACU, the ACU communicates to the power supply using a Rosslare
proprietary protocol sending a command to activate the lock.
Similarly, the Release to Exit (REX) button is attached directly to the
power supply. When the REX is pushed, the power supply

communicates the REX request to the ACU and then the ACU

communicates back to the power supply to activate the lock strike.
If the data line between the ACU and the power supply is cut, the

system immediately detects that the data line has been tampered
with.

«
...
35
36
37
38
39
...
»

Summary of Contents for AC-Q74















































Reviews:

No comments

Related manuals for AC-Q74

AirPro DWL-A520

Brand: D-Link Pages: 8

AirPro DWL-A520

Brand: D-Link Pages: 63

Brand: Jacto Pages: 25

Brand: Magtek Pages: 39

IMAGETEAM 3800i

Brand: Hand Held Products Pages: 32

Brand: Nakamichi Pages: 31

LAN-100G2SF-E810

Brand: IEI Technology Pages: 5

Brand: SMC Networks Pages: 44

Brand: Convex Pages: 36

Brand: Symbol Pages: 9

Brand: Soundstream Pages: 29

Brand: DS Pages: 40

Brand: Edimax Pages: 2

Brand: Access Pages: 23

Brand: Acces I/O products Pages: 31

Brand: Pioneer Pages: 7

Brand: Pioneer Pages: 42

Brand: Pioneer Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands