Rosslare AC-Q74 Installation And Programming Manual Download Page 20

Page: 20 / 46

Request to Exit (REX) Function

AC-Q74 Installation and Programming Manual

Request to Exit (REX) Function

The REX button is connected to the Power Supply Unit (PC-25T). The
REX button must be located inside the premises to be secured and is

used to open the door without the use of a proximity card or PIN
code. It is usually located in a convenient location, such as inside the

door or at a receptionist's desk. The function of the REX button

depends on whether the Lock Strike Relay is programmed for Fail Safe
Operation or Fail Secure Operation.



Fail Secure Operation:

From the moment the REX button is

pressed, the door is unlocked until the Lock Strike Release Time
has passed. After this time, the door is locked even if the REX

button is not released.



Fail Safe Operation:

From the moment the REX button is

pressed, the door is unlocked until the REX button is released,
plus the Lock Strike Release Time. In this case, the Lock Strike

Relay only begins its count down once the REX button is released.

Summary of Contents for AC-Q74















































Search results

Summary of Contents for AC-Q74

Reviews:

Related manuals for AC-Q74

Brands by name

Popular brands

Rosslare AC-Q74, Installation And Programming Manual

Search results

Summary of Contents for AC-Q74

Reviews:

Related manuals for AC-Q74

Brands by name

Popular brands