1
2
3
4
5
14
Pressure Controlled
Solenoid Pilot
No Signal Applied:
All ports closed.
Signal 12 Applied:
Inlet 1 connected to outlet 2; outlet 4
connected to exhaust 5; exhaust 3 closed.
Signal 14 Applied:
Inlet 1 connected to outlet 4; outlet 2
connected to exhaust 3; exhaust 5 closed.
Pressure Controlled
Solenoid Pilot
No Signal Applied:
Inlet 1 connected to outlet 2; outlet 4
connected to exhaust 5; exhaust 3 closed.
Signal 14 Applied:
Inlet 1 connected to outlet 4; outlet 2
connected to exhaust 3; exhaust 5 closed.
Listed below are the valve body service kits and solenoid
replacement coils for Series W65 valves.
Valve Body Service Kits.
These kits contain all parts
needed for complete reconditioning of a valve body. Included
are a spool and sleeve, all required gaskets and seals, and
instructions for use.
VALVE SERVICE
Pressure Controlled
Solenoid Pilot
Signal 12 Applied Momentarily:
Inlet 1 connected to outlet
2; outlet 4 connected to exhaust 5; exhaust 3 closed.
Signal 14 Applied Momentarily:
Inlet 1 connected to outlet
4; Outlet 2 connected to exhaust 3; exhaust 5 closed.
Pressure Controlled
Solenoid Pilot
No Signal Applied:
Inlet 1 closed; outlet 2 connected to
exhaust 3; outlet 4 connected to exhaust 5.
Signal 12 Applied:
Inlet 1 connected to outlet 2; outlet 4
connected to exhaust 5; exhaust 3 closed.
Signal 14 Applied:
Inlet 1 connected to outlet 4; outlet 2
connected to exhaust 3; exhaust 5 closed.
CONVERSION TO EXTERNAL PILOT SUPPLY
To convert a W65 Series ISO valve to external pilot supply:
1. Remove pipe plug from port 14 on base or manifold.
2. Pipe a 1/8" supply line to port 14.
3. Pressure in external supply line should be greater than
inlet. If, for any reason, the external supply is lost or
drops below inlet pressure (port 1), the valve will switch
back to internal pilot supply.
Port 14
Typical Spool-and-Sleeve Cross Section
5/2 SINGLE CONTROL VALVES
5/2 MOMENTARY CONTROL VALVES
5/3 OPEN CENTER VALVES
1
2
3
4
5
14
1
2
3
4
5
12
14
1
2
3
4
5
12
14
1
2
3
4
5
12
14
1
2
3
4
5
12
14
1
2
3
4
5
12
14
1
2
3
4
5
12
14
rosscontrols.com
3
5/3 CLOSED CENTER VALVES
VALVE OPERATION
ROSS would be happy to service this valve for you at its factory repair center. If you purchased your valve from
ROSS please contact ROSS customer service, if you purchased your valve thru an authorized ROSS distributor
please contact the distributor for return instructions.
However, if you choose to service this valve yourself, it is strongly recommended that you visit our website at
www.rosscontrols.com for available downloadable technical documentation.
Replacement
Solenoid
Coils
Voltage
24 volts DC 110-120 volts AC 210-220 volts AC
334B3316
334B33151
334B33152
Valve Type
ISO Size 1
Kit Number
ISO Size 2
Kit Number
ISO Size 3
Kit Number
Single Control
1422K77
1467K77
1471K77
Momentary Control 1423K77
1468K77
1472K77
Closed Center
1424K77
1469K77
1473K77
Open Center
1425K77
1470K77
1474K77
