UDA-8705A User Manual (Iss. 02)
Installation • 2–5
Cabling for the UDA-8705A
This section provides information for connecting cables to the installed Rear Modules on the
DFR-8300 series frames. The input of the UDA-8705A can be terminated on the card depending
on the rear module used. It is not necessary to terminate unused outputs.
DFR-8310 Series Frame Cabling Overview
In the DFR-8310 series frames, the UDA-8705A is used with the following Rear Modules:
•
8310AR-030
Rear Module — Each card occupies one slot and provides one analog input,
and eight analog outputs. (
Figure 2.2
)
•
8310AR-032
Rear Module — Each card occupies one slot and provides eight outputs,
and one looping output. (
Figure 2.3
)
DFR-8321 Series Frame Cabling Overview
In the DFR-8321 series frames, the UDA-8705A is used with the following Rear Modules:
•
8320AR-030
Full Rear Module — Each card occupies two slots and provides one analog
input, and eight analog outputs. (
Figure 2.2
)
•
8320AR-032
Full Rear Module — Each card occupies two slots and provides one analog
input, one looping output, and eight analog outputs. (
Figure 2.3
)
•
8320AR-031
Split Rear Module — Each card occupies one slot and provides one analog
input, and four analog outputs. (
Figure 2.4
)
Figure 2.2
Cable Connections for the
8310AR-030 and 8320AR-030 Rear Modules
Figure 2.3
Cable Connections for the
8310AR-032 and 8320AR-032 Rear Modules
1 2
3 4
5 6
7 8
9 10
ANLG In
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
Not Used
A
1 2
3 4
5 6
7 8
9 10
ANLG In
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
ANLG Out
K
ANLG Loop
