Ross TRA-8206, User Manual

Page: 26 / 40

3–8 • User Controls TRA-8206 User Manual (Iss. 05)
Reclocker Rate Selection
This section describes the Reclocker Rate Selection button and LEDs. Refer to Figure 3.3 for
button and LED locations.
Reclocker Rate Selection LEDs
Table 3.3 provides status information on the Rate Selection button and LED functions. For
example, if the AUTO and 143 LEDs are both lit, the card is in Auto mode and the channel
detects and reclocks at 143Mbps.
= Illuminated LED
Table 3.3 Rate Selection and LED Functions
Date Rate LED Displays
Description
AUTO OTHER 143 177 270 360 540 1485
Cycling through LEDs
Channel searching incoming
signal for a valid data rate
Auto mode, channel detects and
reclocks 143Mbps
Auto mode, channel detects and
reclocks 270Mbps
Auto mode, channel detects and
reclocks 360Mbps
Auto mode, channel detects and
reclocks 540Mbps
Auto mode, channel detects and
reclocks 1.485Gbps
Channel set to reclock 143Mbps
Channel set to reclock 177Mbps
Channel set to reclock 270Mbps
Channel set to reclock 360Mbps
Channel set to reclock 540Mbps
Channel set to reclock 1.485Gbps
Channel equalizes, but does not
reclock, any SDI signal from
143Mbps to 1.485Gbps