Ross TRA-8206, User Manual

Page: 24 / 40

3–6 • User Controls TRA-8206 User Manual (Iss. 05)
Control and Monitoring
This section provides information on the card-edge LEDs of the TRA-8206. Refer to Figure 3.3
for the location of the LEDs.
Figure 3.3 LED and Rate Selection Switch Locations
Status and Selection LEDs on the TRA-8206
The front-edge of the TRA-8206 has LED indicators for the power, channel status, and
communication activity. Basic LED displays and descriptions are provided in
Table 3.2 .
Table 3.2 LEDs on the TRA-8206
LED Color Display and Description
PWR
Green
When lit green, this LED indicates that the card is functioning
normal and that no anomalies have been detected. The following
conditions must be satisfied:
• a valid input signal is present
• a valid reference signal is present when a reference is required,
and that the reference standard matches the input standard.
Flashing Green
When flashing green, this LED indicates that the Bootload button
was pressed, and the card is receiving a new software load from
the frame.
Flashing Green
and Orange When lit green with flashing orange, this LED indicates a signal
or configuration problem. Verify the signal status and settings.
Amber
When lit amber, this LED indicates the card is running internal
diagnostics while powering up.
Red
When lit red or flashing red, this LED indicates the card is not
operational. Re-seat card in frame, check the rear module type
and connections, or call Ross Video Technical Support.
Off When off, this LED indicates there is no power to the card.
PWR LED
Bootload Button
Channel A
Rate Selection
OK/ERROR LED
SD LED
HD LED
Channel A
Channel B
Rate Selection
OK/ERROR LED
SD LED
HD LED
Channel B
Channel C
Rate Selection
OK/ERROR LED
SD LED
HD LED
Channel C