Ross RPPW2600, Manual

Page: 10 / 20

Assemble the hose support(A) to the right side
of the frame using 2 pan head bolts, 4 washers
and 2 nylon hex nuts.
10 | P a g e
Assemble the wand support(A) to the left side
of the frame using 2 pan head bolts, 4 washers
and 2 nylon hex nuts.
Attach quick-connect to pump inlet.
To do this, screw one side of the quick-connect
to the pump inlet. Next, screw the other side of
the quick-connect to the hose. See illustration
below.
metal gun(B). Pull back the rubber piece(C) to
expose the threaded fitting and screw the 2
pieces together, re-position the rubber piece.
. Next install the pressure hose to the wand
(A)and install the other end of the pressure hose
to the pump outlet(B) as shown below.
Assemble the stainless steel wand (A)and the
! "
!
"
#