• Then test the driving depth in a sample piece of wood before using. If the fasteners are
being driven too far or not far enough, adjust the regulator to provide less air pressure or
more air pressure.
Loading fastener and operation Cont .....
WARNING!:
Never operate tool unless safety nose is contact with work-piece. Do
not operate tool without fasteners or damage to tool may result.
WARNING!:
Never fire fasteners into air because fasteners may injury operator or
others and damage to tool may result.
MAINTENANCE
WARNING:
Disconnect the tool from the air compressor before adjusting, clearing
jams, servicing, maintenance, relocating and when not in use.
• Regular lubrication, if your tool without using the in-liner automatic oilier, place 2 or 6
drops of pneumatic tool oil into the air inlet before each work day or after 2 hours of con-
tinuous use depending on the characteristic of work-piece or type of fasteners.
• Air-operated tools must be inspected periodically, and worn or broken parts must be re-
placed to keep the tool operating safely and efficiently. Check and change all worn or dam-
aged O-rings, seals, etc. Tight all the screws and caps in case personal injury.
• Make regular inspection for free movement of trigger, Spring and safety mechanism to
assure safe system is complete and functional: no loose and missing parts, no building or
sticking parts.
• Keep magazine and nose of tool clean and free of any dirt lint or abrasive particles.
• •When temperatures are below freezing, tools should be kept warm by any convenient,
safe method.
Summary of Contents for RANCN65
Page 7: ...EXPLORED VIEW...
