Ross PS-8102 User Manual Download Page 4

6.

The product chassis is to be rack mounted only. To ensure safe operation and maintain 
long-term system reliability, proper installation requires that the front and back area of 
the chassis remain clear of obstructions so as not to restrict airflow.

EMC Notices

United States of America
FCC Part 15

This equipment has been tested and found to comply with the limits for a class A Digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense.

CANADA

This Class “A” digital apparatus complies with Canadian ICES-003. 

Cet appariel numerique de la classe “A” est conforme a la norme NMB-003 du Canada.

EUROPE

This equipment is in compliance with the essential requirements and other relevant provisions of 

CE

 

Directive 93/68/EEC

.

INTERNATIONAL

This equipment has been tested to 

CISPR 22:1997

 along with amendments 

A1:2000

 and 

A2:2002

, and found to comply with the limits for a Class A Digital device.

Maintenance/User Serviceable Parts 

Routine maintenance to this RossGear product is not required. This product contains no user 
serviceable parts. If the module does not appear to be working properly, please contact Technical 
Support using the numbers listed under the “Contact Us” section on the last page of this manual. 
All RossGear products are covered by a generous 5-year warranty and will be repaired without 
charge for materials or labor within this period. See the “Warranty and Repair Policy” section in 
this manual for details. 

Indoor Use: Warning

 — To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain or moisture.

Notice

 — Changes or modifications to this equipment not expressly approved by 

Ross Video Limited could void the user’s authority to operate this equipment.

Notice

 — This is a Class A product. In domestic environments, this product may 

cause radio interference, in which case the user may have to take adequate 
measures.

Summary of Contents for PS-8102

































Reviews: