4–14 • Using the PIVOTCam Control Panel
PIVOTCam Control Panel User Guide (1.2)
To rename shots in the shot button matrix:
1.
Tap the camera button corresponding to the camera that has the shot you want to rename.
2.
Tap the shot bank button for the bank where the shot is stored.
3.
On the
Store/Recall Shots
tab, tap the
Rename Shots
button.
The
Rename Shots
button turns blue, to indicate that the panel is in shot renaming mode.
4.
Tap the shot button for the shot.
The
Rename Shot
dialog box appears.
5.
In the white text box, type a new name for the shot, and then tap
OK
.
The shot is renamed.
Tip
: You can rename shots even if shot button text is hidden, or if the shot position has not yet been recorded.
To rename shots in the shot table:
1.
On the
Store/Recall Shots
tab, tap the
Config Banks and Shots
button.
A configuration interface appears (
).
Figure 4.11
- Renaming Shots in the Shot Table
2.
Tap the camera button corresponding to the camera that has the shot you want to rename.
3.
Tap the shot bank button for the bank where the shot is stored.
4.
In the
Shot Name
column of the shot table, tap the text box for the shot, and then type a new name.
5.
Rename other shots as required.
Tip
: You can assign names to shots that have not yet been created. This allows you to name all your shots in
one session, and then create them later.
6.
When you are finished renaming shots, tap the
Apply
button.
The shots are renamed, and the configuration interface closes.
