1–8 • Introduction
HDC-8223A(-S) User Manual (Iss. 03)
Documentation Terms and Conventions
The following terms and conventions are used throughout this manual.
Terms
The following terms are used:
• “
Board
”, and “
Card
” refer to openGear terminal devices within openGear frames,
including all components and switches.
• “
DashBoard
” refers to the DashBoard Control System.
• “
DFR-8321 series frame
” refers to all versions of the DFR-8321 series frames and any
available options unless otherwise noted.
• “
HDC-8223A
” refers only to the HDC-8223A without the Frame Sync option enabled.
• “
HDC-8223A(-S)
” refers to both the HDC-8223A and the HDC-8223A-S unless
otherwise noted.
• “
HDC-8223A-S
” refers only to the HDC-8223A with the Frame Sync option enabled.
• “
OG3-FR series frame
” refers to the OG3-FR series frames and any available options
unless otherwise noted.
• “
openGear frame
” refers to the DFR-8321 series and OG3-FR series frames and any
available options unless otherwise noted.
• “
Operator
” and “
User
” refer to the person who uses HDC-8223A(-S).
• “
R2-8223A
” refers to the full rear module that provides four reclocked outputs and four
processed outputs.
• “
R2C-8223A
” refers to the full rear module that provides two reclocked outputs, two
processed outputs, and four analog outputs.
• “
SAA
” refers to Safe Action Area.
• “
STA
” refers to Safe Title Area.
• “
System
” and “
Video system
” refer to the mix of interconnected production and terminal
equipment in your environment.
Conventions
The following conventions are used:
• The “
Operating Tips
” and “
Note
” boxes are used throughout this manual to provide
additional user information.
