GPI-100 User Manual (Iss. 06)
Configuration • 4–7
Monitoring
The GPI-100 has several alarms that can affect the overall status of the card. This section outlines
the three status tabs for the GPI-100. These Status tabs provide read-only information to help
monitor the GPI-100 via DashBoard. The indicators in the Status tabs can vary in severity from
green (valid) to red (alarm). DashBoard reports the most severe alarm for a single field.
Product Status
The
Product
tab provides read-only information, such as board revision, serial number, and rear
module type. This information is helpful to a Ross Video technical support when there are
questions about the operation of the unit.
Example of a Product Status Tab
GPIO Status Tab
The
GPIO Status
tab reports the status of the eight GPIO inputs/outputs. The status of each of
the inputs/outputs is either Open or Closed where Open means logic level 1 (3.3V) and Closed
means logic level 0 (0V).
Example of a GPIO Status Tab