2–4 • Installation
GPI-100 User Manual (Iss. 06)
4.
Connect one or more of the GPIO outputs of the card to a GPIO controlled device. Your
GPIO source is now driving your GPIO controlled device through the VANC.
5.
You must set the time for the log’s time stamp to be accurate:
• Select the
Time
tab and set the time according to the instructions in the section
• Select a
Time Source
(Timecode is recommended if it is available in the VANC).
• Set the other parameters if required for the Time Source.
• Click
Accept
to apply your changes.
6.
Select the
Log
tab of the decode card. Each time your GPIO source sends a trigger it
appears in the log. This tab shows the last 20 entries of the log file maintained on the
GPI-100. The complete log can be downloaded to the PC by clicking the
Download
Logfile
Save
button.