DRA-8902 Series User Manual (Iss. 02)
Specifications • 5–3
SDI Outputs
Jitter
MADI: <2.0UI (<4.0nS)
270Mbps: <0.2UI, jitter measured 10Hz-1kHz
1.485Gbps: <1.0UI jitter measured 10Hz-100kHz,
<0.2UI above 100kHz
2.97Gbps: <1.0UI jitter measured 10Hz-100kHz,
<0.3UI above 100kHz
5.94Gbps: <2.0UI jitter measured 10Hz-100kHz,
<0.3UI above 100kHz, band limit @594MHz
11.88Gbps: <2.0UI jitter measured 10Hz-100kHz,
<0.3UI above 100kHz, band limit @1188MHz
Signal Level
800mV ±10%
DC Offset
0V ±50mV (MADI is 400mV +/- 10%)
Overshoot
<10%
Connector Type
HD-BNC
Environment
Max. Ambient Temperature
40°C (104°F)
Power
Total Power Consumption
DRA-8902-10
5.6W
DRA-8902-16
7.6W
a.
All outputs are non-inverting. It is recommended to terminate unused outputs. You can also mute an output via the
Mute Outputs options available in the Setup tab of DashBoard.
b.
All outputs are non-inverting when using DVB-ASI and 270Mbps signals.
Table 5.1 Technical Specifications
Category
Parameter
Specification
Summary of Contents for OpenGear DRA-8902 Series
