DRA-8902 Series User Manual (Iss. 02)
DashBoard Menus • 4–3
Product Tab
outlines the read-only information displayed in the
Product
tab.
Output Status
Channel #
Force Failover (Green)
The Channel is in a forced Failover mode
(the
Force Failover
button was clicked
in the Setup tab) but the Failover alarm is
not enabled on the Alarms tab for the
channel
Force Failover (Red)
The Channel is in a forced Failover mode
(the
Force Failover
button was clicked
in the Setup tab) for the channel
No Signal (Green)
The output signal is not present. The
Invalid Signal alarm for this channel (in
the Alarms tab) is disabled.
No Signal (Red)
The output signal is not present. The
Invalid Signal alarm (in the Alarms tab)
for this channel is enabled.
Signal Not Locked (Green)
An output signal is present, but not
locked. The Invalid Signal alarm (in the
Alarms tab) is disabled for this output
channel.
Signal Not Locked (Red)
An output signal is present, but not
locked. The Invalid Signal alarm (in the
Alarms tab) is enabled for this output
channel.
Table 4.2 Product Tab Items
Tab Title
Item
Parameters
Description
Product
DRA-8902-#
Displays the card model
Supplier
Ross Video Ltd.
Indicates the manufacturer of your card
Board Rev
##
Indicates the version of the PCB
Board S/N
######
Indicates the card serial number
Software Rev
##.##
Indicates the software version
Daughter
Boards
1
6 Output
Indicates if a Daughter Card is installed in
the indicated position on the PCB and
provides the specified connections
None
2
6 Output
None
Table 4.1 Signal Tab Items
Tab Title
Item
Parameters
Description
Summary of Contents for OpenGear DRA-8902 Series
