Ross NK-IPS, User Manual, Page: 40 / 42

40 • DashBoard Interface Overview NK-IPS User Guide (v5.0)
NK Switchboard Interface
The NK Switchboard interface enables the routing matrix to be monitored and optionally controlled on any router
on any NK-IPS detected on the network.
Figure 8.2 Example of the NK Switchboard Interface
Top Toolbar
The toolbar located at the top of the NK Switchboard interface provides buttons to select a device in the routing
system the NK-IPS detects on the network.
Right Toolbar
Table 8.3 summarizes the buttons displayed in the toolbar located to the far right side of the NK Switchboard
interface.
Table 8.2 Update IPS Network Settings Dialog
Item Parameters Description
Use DHCP Selected The NK-IPS automatically obtains its network settings from a
Dynamic Host Configuration Protocol (DHCP) server.
Cleared The user must assign static network settings to the NK-IPS
Address #.#.#.# Specifies the IP Address for the NK-IPS
Netmask #.#.#.# Specifies the Netmask value for the NK-IPS
Gateway #.#.#.# Specifies the IP Gateway value for the NK-IPS
Port #.#.#.# Specifies the port number assigned to NK-IPS on the network
(read-only)
Send Settings Sends the settings to the NK-IPS
Cancel Changes to the dialog are not applied; the dialog closes