FDR-9647-LC, FDT-9648-LC, and FDB-9649-LC User Guide (v5.0)
FDT-9648-LC • 13
FDT-9648-LC
This chapter presents information on the FDT-9648-LC hardware components and features.
Overview
The FDT-9648-LC is an SDI to fiber optic converter capable of equalizing and re-clocking all common serial digital
signals. Each channel of the module equalizes the incoming SDI signal, re-clocks the signal with automatic rate
detection for all popular data rates. Each channel is fully independent and can run at different data rates.
The FDT-9648-LC provides the ability to transport digital video baseband signals over a fiber optic link, allowing
for longer transport distances. SDI outputs are re-clocked providing excellent jitter and return loss specifications.
Figure 4.1 Simplified Block Diagram of FDT-9648-LC Functions
Faceplate Overview
The chassis faceplate provides a silk-screen map of the connections available.
illustrates the
FDT-9648-LC faceplate label.
Figure 4.2 FDT-9648-LC — Faceplate Label
POWER Connection
Each module has a standard miniature power jack (center pin positive) that connects to the PS-9000 power supply.
This PWR jack is in the same location on each module regardless of the module type. (
)
Figure 4.3 FDT-9648-LC (Right Side) — PWR Connection
EQUALIZER
ELECTRICAL
TO
OPTICAL
CONVERTER
RECLOCKER
BUFFER
EQUALIZER
ELECTRICAL
TO
OPTICAL
CONVERTER
RECLOCKER
BUFFER
3G/HD/SD SDI
OPTO OUT 1
3G/HD/SD SDI
OPTO OUT 2
3G/HD/SD
SDI IN 1
3G/HD/SD
SDI IN 2
INPUT
SDI IN 1
SDI IN 2
FDT-9648-LC
3G/HD/SD
DUAL CHANNEL
FIBER TRANSMITTER
PWR
LO
C
K
OPT
O
1
OPT
O
2
OUT 1
OUT 2
Bottom
Top
POWER Connection