Network Setup
AirCleaner
®
is equipped with a single ethernet port to
allow remote access for upgrades over FTP.
The system does not require an IP address to operate.
To Set the IP Address
The factory default IP address is 192.20.200.240. You
can change this to another address to better integrate into
your facility.
Note:
The AirCleaner
®
does not support DHCP.
1.
Open a web browser and navigate to the IP address
of the AirCleaner
®
.
2.
Enter the new network settings in the
IP Address
,
Subnet Mask
, and
Gateway
fields.
3.
Click
Update IP Settings
.
The ethernet subsystem of the AirCleaner
®
restarts
with the new network settings.
4.
Wait 45 seconds for the ethernet subsystem to
reboot. The amber LED will be on and the green
LED blinking when the reboot is complete.
20
• Network Setup — Abekas AirCleaner User Manual (v3.5)