Ross 9516DR-004-03, User Manual, Page: 25 / 26

DAC-9516 User Guide (v3.0) Technical Specifications • 25
Technical Specifications
This chapter provides technical information for DAC-9516.

Specifications are subject to change without notice.
Analog Audio Output
AES Input
Performance
Table 8.1 Technical Specifications — Analog Audio Output
Item Specifications
Number of Outputs 2 balanced stereo pair copies (A1 and B1, A2 and B2) via
removable terminal block strips
Impedance 66ohm
Max. Output Level +27dBu into 10kohm
Connector Type 12-pin screw-type terminal block strip
Table 8.2 Technical Specifications — AES/EBU Input
Item Specifications
Number of Inputs 1 AES-3id
Standards Supported SMPTE 276M
Sample Rate 32kHz, 44.1kHz, 48kHz
Impedance 75ohm terminating
Input Level Minimum: 100mV
Maximum: 2.5Vp-p
Return Loss <-38dB (0.1 to 6MHz)
Connector BNC
Table 8.3 Technical Specifications — Performance
Item Specifications
Quantization 8 to 24bits
Frequency Response 20Hz - 20kHz
Signal to Noise Ratio ±100dB (22Hz-20kHz AES 17 filter)
48kHz - 20dBFs
THD <0.01%
>100dB @ -20dBFS
IMD <0.002%
SMPTE/4:1