Ross 9516DR-004-03, User Manual, Page: 14 / 26

14 • Physical Installation DAC-9516 User Guide (v3.0)
Figure 4.1 Surface Mount Installation Option
3. Remove the Protective Backing Film from the other side of the VELCRO® brand Surface Mount Strips .
4. Press the chassis into position on the surface you want to mount it to.
Flat Metal Plate
Use the flat metal plate for permanent mounting to a rack, a desk, or any other location where bolts or screws can be
applied. Be sure to position the module to allow for operator adjustments, if required.

Mounting screws are not provided by Ross Video.
To install the Flat Metal Plate
1. Remove the 2 screws from the bottom of the chassis.
2. Install the Flat Metal Plate onto the bottom of the chassis Figure 4.2 using the screws removed in Step 1. .
Figure 4.2 Flat Metal Plate Installation Option
3. Install the chassis in the desired location using the Mounting Holes on the Flat Metal Plate .