Ross 9259ADR-004-02 User Manual Download Page 4

European Union

This equipment is in compliance with the essential requirements and other relevant provisions established under regulation (EC) No 
765/2008 and Decision No 768/2008/EC referred to as the “New Legislative Framework”. 

Australia/New Zealand

This equipment is in compliance with the provisions established under the Radiocommunications Act 1992 and 
Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008.

Korea

This equipment is in compliance with the provisions established under the Radio Waves Act. 

International

This equipment has been tested under the requirements of CISPR 22:2008 or CISPR 32:2015 and found to comply with the limits for 
a Class A Digital device. 

Maintenance/User Serviceable Parts

Routine maintenance to this GearLite product is not required. This product contains no user serviceable parts. If the module does not 
appear to be working properly, please contact Technical Support using the numbers listed under the “Contact Us” section on the last 
page of this manual. All GearLite products are covered by a generous 3-year warranty and will be repaired without charge for 
materials or labor within this period. See the “Warranty and Repair Policy” section in this manual for details.

Environmental Information

The equipment may contain hazardous substances that could impact health and the environment.

To avoid the potential release of those substances into the environment and to diminish the need for the extraction of natural 
resources, Ross Video encourages you to use the appropriate take-back systems. These systems will reuse or recycle most of the 
materials from your end-of-life equipment in an environmentally friendly and health conscious manner.

The crossed-out wheeled bin symbol invites you to use these systems.

If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste 
administration. You can also contact Ross Video for more information on the environmental performances of our products.

Warning

 — This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may 

cause radio interference.

Notice

 — This is a Class A product. In domestic environments, this product may cause radio interference, in which 

case the user may have to take adequate measures.

Summary of Contents for 9259ADR-004-02

























Reviews: