Ross 9259ADR-004-02, User Manual, Page: 19 / 24

DMX-9259-A User Guide (v2.0) Setup • 19
Setup
The DIP Switches on the bottom of the DMX-9259-A enable you to configure the output audio groups.
For More Information on...
• the location of the DIP Switches, refer to the section “ DIP Switches ” on page 13.
Using the DIP Switches
Figure 6.1 shows the DIP Switches set in the ON (  ) position.
Figure 6.1 DMX-9259-A — DIP Switches
Table 6.1 outlines how to set SW1 and SW4 to assign the audio groups to the required outputs. The following
conventions are used:

Set the DIP switch in the ON position

Set the DIP Switch in the OFF position
Table 6.1 Audio Group Configuration
DMX2 OUT DMX1 OUT
Group
Assign SW1 SW2 SW3 SWR
  Group 1
  Group 2
  Group 3
  Group 4
  Group 1
  Group 2
  Group 3
  Group 4
ON
1 2 4 3
DMX 2 DMX 1