DETOUR User Guide (v3.0)
Configuration • 17
Updating the Network Settings for DETOUR
Once you establish initial communications with the DETOUR, and it displays in the DashBoard Tree View, you
may wish to review or change the IP Address and other settings according to your facility network requirements.
This section is not applicable if your DETOUR is already set to the correct IP Address.
To update the network settings for the DETOUR
1. Locate the DETOUR node in the Tree View of DashBoard.
2. Double-click the DETOUR node.
3. Select the
Network
tab in the far-right of the DashBoard window.
4. Use the
IP Address
field to specify the new static IP Address for the DETOUR.
5. Use the
Subnet Mask
field to specify the Subnet Mask for your network.
6. Use the
Default Gateway
field to specify the gateway for communications outside of the LAN.
7. Click
Apply
.
Re-naming DETOUR in the DashBoard Tree View
By default, DETOUR ships with the name “DETOUR” automatically set. Each DETOUR can be given a unique
name that is used on internal menus and as the identifier in the tree views of DashBoard.
To re-name DETOUR in DashBoard
1. From the
Device View
, select the
Network
tab.
2. Enter a unique identifier in the
Device Name
field for your DETOUR. This name displays in the Tree View and
the Device Name in the Product Status tab for the module.
3. Click
Apply
to save the new settings.
Configuring the Bypass Relay
DETOUR includes a bypass relay between BYPASS IN and OUT 1. This protects your on-air feed when the
module is off-line and ensures critical program content is not lost. The bypass relay can be enabled or disabled via
the options in DashBoard.
To configure the bypass relay
1. From the
Device View
, select the
Setup
tab.
2. Use the
Relay Status
options to specify an operating mode for DETOUR. Choose from the following:
•
Normal
— DETOUR is not in Bypass mode (the bypass relay is disabled). The input signal available on the
SDI IN HD-BNC is used.
•
Bypass
— DETOUR is in Bypass mode. The input signal available on the BYPASS IN HD-BNC is used.
3. Select the
Relay Auto Reset
box to enable DETOUR to automatically switch to Normal mode when a valid
input signal is detected on the SDI IN HD-BNC.
4. Select the
Relay Bypass on LOS
box to enable DETOUR to automatically switch to Bypass mode when a loss
of input signal is detected on the SDI IN HD-BNC.
5. Select the
Relay Bypass on Lock Error
box to enable DETOUR to automatically switch to Bypass mode
when:
• the SDI reclocker loses lock; or
• the reclocker rate is fixed to a different standard than is currently being received. Refer to the section refer to
the section “Configuring the Reclocker” on page 18 for details on setting the rate.
Summary of Contents for 9201DR-104-03
