2. PRECAUTIONARY MEASURES
This machine may only be used with foodstuffs. It cannot be used for liquids or any other kind of
product that could damage and pollute it.
This appliance isn’t intended to be used in household and similar applications such as: staff kitchen
areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and
other residential type environments; bed and breakfast type environments.
The manufacturer cannot be held responsible for damage to people or things caused by unsuitable,
erroneous or irrational use.
3. INTRODUCTION
This booklet is a guide to rapid and easy use and maintenance of coffee machines.
Please read these instructions carefully.
The company garantees that should any defect or problem occur, it will provide its support through
its Repair Service points.
Have your coffee machine inspected by qualified personnel at least once a year.
This
constant care will make your machine safer and more efficient.
Our coffee machines have been designed and manufacured in complicance with all specifications that
distinguish traditional espresso coffee machines: noble materials such as copper and steel and reliable
components make alla machines made by the company safe, reliable and funciontal.
No liability can be accepted by the company for any damage to persons or things caused by non-com-
pliance with these instructions.
4. INSTALLATION
1)
Remove the coffee machine from its parcking and check that it has not been damaged.
2)
Place the appliance on a stable top, close to the mains sockets and water line connections.
Level the coffee machine by adjusting its feet. Check that the voltage of your mains supply corre-
sponds to that indicated in the technical specifications.
4a. Equipment with 4 Liters Boiler, with internal tank
Before rotating the the switch knob to position 1, fill the rear water tank under the cup
shelf.
3)
Remove the upper cover grid, take out the water tank (located inside the machine) and rinse it.
4)
Fill the tank with approx. 4 litres clean water, put it back, connect the water softener and insert the
small silicone tubes. Close the upper cover grid on the machine.
5)
Before start-up the fitter must make sure the machine has been properly connected to the electrical
and earthing systems involved and check the efficiency of protection from direct contact.
In Europe connect the approved cord H05VV-F 3G 1.5 mm with the Schuko plug to the electricity
supply.
In USA-Canada connect the approved cord Type SJTO, rated 3x14 AWG, 300 V, 105°C with the
NEMA 5x15P plug to the electricity supply.
IT IS STRICTLY FORBIDDEN TO USE THE MACHINE WITHOUT EFFECTIVE SAFE
EARTHING.
4b. Equipment with 4 Liters Boiler, with water supply connection
If your machine is to be connected to the mains water supply call a specialized techni-
cian.
3)
Connect the cleaner to the coming out flexible pipe (3/8”) (use only pipes approved for potable
water as required by Italian Ministerial Decree 21.03.73 and later amendments). Remove the front
9
