5
Please kindly be noted
T-shaped plastic outlet and v-flaps can not be used at the same
time. You can use them in two ways :
1) Add v-flap on existing outlet;
2) Use T-shaped plastic outlet, no add v-flap.
INSTALLATION (VENT OUTSIDE)
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts
to its body.The images only show an example of how to mount the V-flap,the outlet may be
various according to different models and configuration.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6;
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part.
Note:
The product is provided with v-flap accessory. This accessory is not mandatory for
installation, operation and use of the product.
If you have an outlet to the outside, your cooker hood can be connected as below picture
by means of an extraction duct (enamel, aluminum, flexible pipe or non-flammable material
with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
