SATA 150 RAID 2 Port PCI Host
RC201 User Manual
procedures to install Windows accordingly.
2.
Once Windows has been installed, click
My Computer
, then click
Properties
. Click
Device Manager
tab.
3.
Double click
Other Devices
then
PCI RAID Controller
.
4.
Click
Driver
tab, then
Update Driver
.
5.
Insert the Driver CD, check
Specify the location of the driver (Advanced)
and click
Next
.
6.
Select
Search for the better driver
option, check
Specify a location
, uncheck
Removable
Media
, type in
E:\
(If your CD-ROM/DVD is
E
:\), and click
Browse
.
7.
Points specify a location, example
E
:\
SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0 \
Driver
, click
OK
and then
Next.
8.
Click
Next
and then
Finish
.
9.
Remove the Driver diskette and click
Yes
to restart Windows to complete driver installation.
For Existing Windows ME Systems
1.
After the
SATA RAID PCI Host Adapter
and attached drives are configured, boot up Windows.
2.
At the
Add New Hardware Wizard
, check
Specify the location of the driver (advanced),
and
click
Next
.
3.
Insert the Driver CD, check
Specify a location,
uncheck the other boxes,
and click
Browse
.
4.
Points specify a location, example
E
:\
SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0 \
Driver
, click
OK
and then
Next
.(If your CD-ROM/DVD is
E
:\)
5.
Click
Next
and then
Finish
.
Verification of the Proper Installation for Windows 98/98SE/ME
1.
Double click
My Computer/Control Panel/System
. Click
Device Manager
tab.
2.
Double click
SCSI Controllers
,
Silicon Image Sil-3x12 SATA Raid Controller
should be
listed.
3.
Highlight
Silicon Image Sil-3x12 SATA Raid Controller
and click
Properties
. A message
This device is working properly
is displayed in the dialog box, the driver has been correctly installed.
If any error message is displayed, remove
Silicon Image Sil-3x12 SATA Raid Controller
and
restart your system.
4.3. Windows NT 4.0 Driver Installation
For New Windows NT 4.0 System
1.
Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0\ driver\ *.* to a blank floppy disk
2.
After the SATA RAID PCI Host Adapter and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
3.
At the
Windows Set-up
screen, press
F6
to specify and add the driver.
4.
Press
S
, select
Other
, then press
Enter
.
5.
Insert the Driver diskette and press
Enter
.
6.
Select
Silicon Image Sil-3x12 SATA Raid Controller Driver
and press
Enter
.
7.
Press
Enter
to continue and follow on-screen instructions to complete Windows NT 4.0
installation.
Add Windows NT 4.0 Driver on Original Booting Device
1.
After the
SATA RAID PCI Host Adapter
and attached drives are configured, boot up Windows. Double
click My Computer/Control Panel/SCSI Adapters, then click the Drivers tab.
2.
Click
Add…
then
Have Disk...
.
3.
Insert the Driver CD in your CD-ROM/DVD drive and type in
E:\
(If your CD-ROM/DVD is
E
:\), then click
Browse
.
4.
Points specify a location, example
E
:\
SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0 \
9
