SATA 150 RAID 2 Port PCI Host
RC201 User Manual
Driver
, click
Open
then
OK
.
5.
Highlight
Silicon Image Sil-3x12 SATA Raid Controller
and click
OK
.
Verification of the Proper Installation for Windows NT 4.0
1.
Double click
My Computer/Control Panel/SCSI Adapters
.
2.
Highlight
Silicon Image Sil-3x12 SATA Raid Controller
and click
Properties
.
This device is
working properly
is displayed in the dialog box, the driver has been correctly installed.
4.3.
Windows 2000 Driver Installation
For New Windows 2000 Systems
1.
Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0\driver\ *.* to a blank floppy disk.
2.
After the
SATA RAID PCI Host Adapter
and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
3.
At the
Windows Set-up
screen, press
F6
to specify and add the driver.
4.
Insert the Driver diskette. Press
S
, then press
Enter
.
5.
Select
Silicon Image Sil-3x12 SATA Raid Controller Driver
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen instructions to complete installation.
Add Windows 2000 Driver on Original Booting Device
1.
After the
SATA RAID PCI Host Adapter
and attached drives are configured, boot up Windows.
2.
At the
Found New Hardware Wizard
, click
Next
.
3.
Select
Search for a suitable driver for my device (recommended)
and click
Next
.
4.
Insert the Driver CD in your CD-ROM/DVD drive, check
Specify a location
, uncheck the other boxes,
click
Next,
type in
E:\
(If your CD-ROM/DVD is
E
:\). Click
Browse
.
5.
Points specify a location, example
E
:\
SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0 \
Driver,
click
Open
then
OK
.
6.
If the
Digital Signature Not Found
message appears, click
Yes
. (
Note
If prompted for Windows
2000 CD-ROM, insert the CD and click
OK
. Type in E
:\I386
, click
OK
and
Finish
. (assuming E
:
is your
CD-ROM drive))
7.
Click
Finish
.
4.5. Windows XP Driver Installation
For New Windows XP Systems
1.
Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\ Win98_me
_
2000_
xp_nt4.0\driver\ *.* to a blank floppy disk
2.
After the
SATA RAID PCI Host Adapter
and attached drives are configured, follow Microsoft
procedures to install Windows accordingly.
3.
At the
Windows Set-up
screen, press
F6
in order to specify and add the driver.
4.
Insert the Driver diskette. Press
S
then press
Enter
.
5.
Select
Silicon Image Sil-3x12 SATA Raid Controller Driver
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen instructions to complete Windows XP installation.
Note:
When the
Software Installation
warning pops up, click
Yes
. And when the
Hardware
Installation
warning pops up, click
Yes
again.
10
