16
AV7950H Owner’s Manual
The wireless IR headphones require two (2) “AAA” batteries. To
replace the batteries, slide off the battery compartment door on the left
earpiece and insert batteries, as shown. Make certain that the battery
orientation matches the marks inside the battery compartment.
The system comes with infrared (IR) 2 channel wireless fold-flat
headphones. These headphones receive a signal from an IR transmit-
ter built into the unit. Headphones allow rear-seat passengers to listen
without using the vehicle speakers.
To turn the headphones on and off
, push the Power ON/OFF button on
the earpiece. The Power LED on the earpiece indicates when head-
phone power is on. Power turns off automatically after three minutes of
no audio, in order to preserve battery life.
The headphones have a two-position slide switch labeled “A/B.” When
the switch is in the “A” position, the headphones play audio from the
source designated as “A.” When the switch is in the “B” position, the
headphones play audio from the source designated as “B.”
To adjust the headphone volume
,
rotate the thumb wheel on the head-
phones.
Adjust headphones
here
A/B Switch
Batteries
Volume
On/Off
Using The Wireless Headphones
Replacing The Headphone Batteries
You may use optional external video games, camcorders, and other
portable video units by connecting the unit to the auxiliary RCA input
jacks on the unit.
To use an external game system, a 12VDC to 110VAC power inverter,
available at most electronic retail stores, is often required.
Note:
If you want to watch non-widescreen, 4:3 images, press
the
DISPLAY
button on the remote control until “
STANDARD”
is displayed on the screen. This will properly size the image,
instead of stretching the image across the wide screen. In
“
STANDARD”
mode, you will see black bars on the sides
of the
image.
Using External Sources
Summary of Contents for AV7950H
Page 1: ...Dual Mutimedia Headrest Replacement Entertainment System Owner s Manual ...
Page 2: ......
Page 4: ......