background image

17” Fold Down

Page 13

Operation

Operation

To switch to different main menus (OSD, Utility, Auto)
use the 

34

 buttons on the switch panel.

To highlight a submenu use the 

6

button on the

switch panel. When submenus are highlighted use
the 

34

buttons to adjust up or down.

To return to the main menu highlight return in
submenu and use the

4

button on the switch panel.

To exit main menu use 

4

button until exit is

highlighted and then press the menu button.

Note

:

 It takes 5 seconds for changes to be stored into memory

On Screen Display (OSD) Main Menu

The On Screen Display (OSD) provides a set of menus that
enable you to adjust or view monitor features. Main menu
selections lead to submenus with additional choices. Press
the menu button on the switch panel to see the main menu.

This Display turns on automatically when the Fold Down is in
its opened position, and turns off automatically when the
display is stowed.

The display auto-detects an RGB signal when an RGB signal
is connected to the monitor by detecting the presence of the
Hsync signal (pin 8 of the 21WA4 connector). If no RGB
signal is detected, the display automatically switches to
composite video input whether a video signal is present or not.
The Source button on the optional controller will be locked out.

Main Menu

Submenus

Summary of Contents for 1710





















Reviews: